Frequently Asked Questions
Get all the answers to the most frequently asked questions (FAQs) regarding industry, research, development and much, much more.
- Long history of product and application know-how
- Capability to source and provide service for any product and anywhere
- Highly knowledgeable and technical staff and engineers
- In house technical support and service
- Large inventory of products, parts and consumables
Application of SadaShiv Blowers Are :- Metallurgy, Water Treatment, Pneumatic Conveying, Chemical, Pharmaceutical, Food Processing, Cement, Sewage & Effluent, Sugar, Effluent/ Water Treatment Plant, Air Agitation of chemical solution, Filter Bed Agitation, Sulphation process – Sugar plants, Cement Blending, Aeration & Fluidation, Pneumatic Conveying – Cement Chemicals, Fertilizer & Chemical Plants, Power Generation Paper Bulk, Textile, Gas, Ice, GLS Lamps, Transport Vehicles, Refineries, Breweries & Distilleries, Soap & Detergents, Fertilizer, Pressuration of high altitude Chambers, Air Blowing Glass Industry, Agitation of liquids – Electroplating plants, Ice-plants, Lamps & Luminaries manufacturing plants etc., Centralised vacuum cleaning, Boosting or Evacuation of gases, Fisheries / Hatcheries / Aquaculture.
Customer Connect as you need the Blower along with the pipelines, silencers , NRV’s, PRV’s , Bellow etc. our rental blowers come packed as complete set . Customers just need to connect with their piping and take the line to diffusors for machine to be switched on and start running.
| S. No. | Observation | Action |
|---|---|---|
| 1. | Loose flange at inlet/outlet of Blower. | Tighten the joints |
| 2. | Improper opening of non-return valve | Correct the valve position as per flow direction |
| 3. | Low level of gear oil | Fill the oil to correct (red mark) level. |
| 4. | Higher of gear oil | Adjust the specified R.P.M. of the blower |
| 5. | Filter choking | Clean/change the filter |
| S. No. | Observation | Action |
|---|---|---|
| 1. | The filter is dirty and choked | Clean/change the filter. |
| 2. | Discharge pressure too high : a) Direction/operation of NRV not proper OR b) Operation of gate valve not proper OR c) Operation of safety valve not proper |
Correct the valve position as per flow Direction or change the NRV Rectify/change the gate valve/delivery gate Clean the male & female parts of Safety valve or change the valve |
| 3. | Oil level too low/high or oil chamber is dry | Fill the oil chamber to correct level. |
| 4. | Viscosity of oil is high. | Fill the specified grade of oil. |
| 5. | Bearings at pulley side are dry | Grease the bearings or fill correct oil (For both side oil lubricating Blower). |
| 6. | Deposits on the lobes/inner walls of casing. (For checking this open the inlet/outlet flange of the blower) |
Clean the blower with Kerosene/Diesel. |
| S. No. | Observation | Action |
|---|---|---|
| 1. | Deposits on the lobes or inner wall of the casing | Clean the blower with Kerosene/Diesel. |
| 2. | Electric Motor is faulty (To check this remove the belts, isolate the Blower from motor and run the motor.) | Change the motor. |
| S. No. | Observation | Action |
|---|---|---|
| 1. | Oil leaks from the breather plug Cause : Oil level too high. | Fill the oil to marked level. |
| 2. | Oil leaks through the drain plug Cause: a) Loose fitting of plug b) Rubber seal damaged |
Tight the plug properly Change the seal |
| 3. | Oil leakage from vent hole of the blower in gear and pulley side. | Call our nearest Sales Office |
| 4. | Oil leakage in delivery line | Call our nearest Sales Office |
Few More thing you should know
OPERATION & MAINTENACE
"Sadashiv Blowers Pvt Ltd."" is team of well Qualified, Experienced & dedicated engineers committed to give best quality of maintenance our products supported by prompt after sales service.Our goal is to provide advanced technology to meet our customers needs.py Profile We guarantee to provide the blowers with top quality and competitive price to our customers.
Know About Sadashiv Blowers Pvt Ltd.
We are our best critics. We regularly and transparently do our SWOT analysis both at Departmental and Organizational level thereby focusing on improving our strengths, grabbing opportunities, overcoming weakness eliminating threats. We strongly believe the most important asset for any company is its employees and strive towards making a healthy workplace for all our team members; ensuring a happy work-life balance.
